Netgate 1100 DIN Rail Mount Kit
This DIN Rail mounting kit enables simple, safe and fast installation of the Netgate 1100 Security Appliance to either the wall or a DIN Rail. The wall mount plate is made of black anodized aluminum that uses a silicone band to attach to the Netgate 1100 system. The wall mount plate can be mounted to the wall by two screws and wall anchors. The DIN Rail connectors are made of PA plastic which attaches with screws to the wall mount plate, then clips onto a standard DIN rail.
- Black Anodized Aluminum Wall Mount Plate
- Wall Mount Screw Pack:
- 2x silicone bands (1 spare band included with each kit)
- 4x #6x1 Phillips Drive Pan Head Sheet Metal Screws
- 4x #6 Blue Plastic Wall Anchors
- Two DIN rail polyamide mounting clips
- 4x M3-0.5 x 8mm Phillips Pan Head Screws to attach the DIN clips to the wall mount plate
Warranty and support information:
- One year hardware warranty.
- Standard 30 day return policy.
- All Specifications subject to change without notice.
This is a combo pack consisting of the wall mount plate and DIN rail clips. The Netgate 1100 is shown for display purposes and is not included in the cost of the kit.
Please make a note of your serial numbers and any other additional information on the bottom of your system before affixing the wall mount plate. This information will be unreadable with the plate properly mounted on the system. Please take a picture of the information or write it down for future reference.
Made in the USA.